? semiconductor components industries, llc, 2006 january, 2006 ? rev. 10 1 publication order number: MC100EPT22/d MC100EPT22 3.3vdual lvttl/lvcmos to differential lvpecl translator description the MC100EPT22 is a dual lvttl/lvcmos to differential lvpecl translator. because lvpecl (positive ecl) levels are used only +3.3 v and ground are required. the small outline 8 ? lead package and the single gate of the ept22 makes it ideal for those applications where space, performance, and low power are at a premium. because the mature mosaic 5 process is used, low cost and high speed can be added to the list of features. features ? 420 ps typical propagation delay ? maximum frequency > 1.1 ghz typical ? operating range: v cc = 3.0 v to 3.6 v with gnd = 0 v ? pnp lvttl inputs for minimal loading ? q output will default high with inputs open ? the 100 series contains temperature compensation. ? pb ? free packages are available d = date code a = assembly location l = wafer lot y = year w = work week = pb ? free package soic ? 8 d suffix case 751 marking diagrams* tssop ? 8 dt suffix case 948r alyw ka22 1 8 1 8 http://onsemi.com *for additional marking information, refer to application note and8002/d. see detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. ordering information 1 8 kpt22 alyw 1 8 dfn8 mn suffix case 506aa 3s d 14 (note: microdot may be in either location)
MC100EPT22 http://onsemi.com 2 1 2 3 45 6 7 8 d0 gnd v cc figure 1. 8 ? lead pinout (top view) and logic diagram q0 d1 q1 q1 q0 lvpecl lvttl table 1. pin description pin q0, q1, q0 , q1 d0, d1 lvttl inputs function lvpecl differential outputs v cc positive supply gnd ground table 2. attributes characteristics value internal input pulldown resistor n/a internal input pullup resistor n/a esd protection human body model machine model charged device model > 4 kv > 200 v > 2 kv moisture sensitivity, indefinite time out of drypack (note 1) pb pkg pb ? free pkg soic ? 8 tssop ? 8 dfn8 level 1 level 1 level 1 level 1 level 3 level 1 flammability rating oxygen index: 28 to 34 ul 94 v ? 0 @ 0.125 in transistor count 164 devices meets or exceeds jedec spec eia/jesd78 ic latchup test 1. for additional information, see application note and8003/d.
MC100EPT22 http://onsemi.com 3 table 3. maximum ratings symbol parameter condition 1 condition 2 rating unit v cc power supply gnd = 0 v 6 v v i input voltage gnd = 0 v v i v cc 6 to 0 v i out output current continuous surge 50 100 ma ma t a operating temperature range ? 40 to +85 c t stg storage temperature range ? 65 to +150 c ja thermal resistance (junction ? to ? ambient) 0 lfpm 500 lfpm soic ? 8 soic ? 8 190 130 c/w c/w jc thermal resistance (junction ? to ? case) standard board soic ? 8 41 to 44 c/w ja thermal resistance (junction ? to ? ambient) 0 lfpm 500 lfpm tssop ? 8 tssop ? 8 185 140 c/w c/w jc thermal resistance (junction ? to ? case) standard board tssop ? 8 41 to 44 c/w ja thermal resistance (junction ? to ? ambient) 0 lfpm 500 lfpm dfn8 dfn8 129 84 c/w c/w t sol wave solder pb pb ? free 265 265 c maximum ratings are those values beyond which device damage can occur. maximum ratings applied to the device are individual str ess limit values (not normal operating conditions) and are not valid simultaneously. if these limits are exceeded, device functional operation i s not implied, damage may occur and reliability may be affected. table 4. ttl input dc characteristics v cc = 3.3 v, gnd = 0 v, t a = ? 40 c to 85 c symbol characteristic condition min typ max unit i ih input high current v in = 2.7 v 20 a i ihh input high current max v in = v cc 100 a i il input low current v in = 0.5 v ? 0.6 ma v ik input clamp voltage i in = ? 18 ma ? 1.0 v v ih input high voltage 2.0 v v il input low voltage 0.8 v note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. table 5. pecl output dc characteristics v cc = 3.3 v, gnd = 0.0 v (note 2) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max i cc power supply current 32 43 55 35 45 60 37 46 62 ma v oh output high voltage (note 3) 2155 2280 2405 2155 2280 2405 2155 2280 2405 mv v ol output low voltage (note 3) 1355 1480 1605 1355 1480 1605 1355 1480 1605 mv note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 2. output parameters vary 1:1 with v cc . 3. all loading with 50 to v cc ? 2.0 v.
MC100EPT22 http://onsemi.com 4 table 6. ac characteristics v cc = 3.0 v to 3.6 v, gnd = 0.0 v (note 4) symbol characteristic ? 40 c 25 c 85 c unit min typ max min typ max min typ max f max maximum frequency (figure 2) 0.8 1.1 0.8 1.1 0.8 1.1 ghz t plh , t phl propagation delay to output differential 250 400 650 250 420 675 300 500 700 ps t skew within ? device skew (note 5) device ? to ? device skew (note 6) 50 200 100 400 50 200 100 425 50 200 100 400 ps t jitter random clock jitter (figure 2) 0.2 < 1 0.2 < 1 0.2 < 1 ps t r t f output rise/fall times q, q (20% ? 80%) 50 110 200 60 120 220 70 140 250 ps note: device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printe d circuit board with maintained transverse airflow greater than 500 lfpm. electrical parameters are guaranteed only over the declared operating temperature range. functional operation of the device exceeding these conditions is not implied. device specification limit values are applied individually under normal operating conditions and not valid simultaneously. 4. measured using a 2.4 v source, 50% duty cycle clock source. all loading with 50 to v cc ? 2.0 v. 5. skew is measured between outputs under identical transitions and conditions on any one device. 6. device ? to ? device skew for identical transitions at identical v cc levels. 0 100 200 300 400 500 600 700 800 900 0 200 400 600 800 1000 1200 1400 1600 1 2 3 4 5 6 7 8 9 figure 2. f max /jitter frequency (mhz)
MC100EPT22 http://onsemi.com 5 figure 3. typical termination for output driver and device evaluation (see application note and8020/d ? termination of ecl logic devices.) driver device receiver device qd q d z o = 50 z o = 50 50 50 v tt v tt = v cc ? 2.0 v ordering information device package shipping ? MC100EPT22d soic ? 8 98 units / rail MC100EPT22dg soic ? 8 (pb ? free) 98 units / rail MC100EPT22dr2 soic ? 8 2500 / tape & reel MC100EPT22dr2g soic ? 8 (pb ? free) 2500 / tape & reel MC100EPT22dt tssop ? 8 100 units / rail MC100EPT22dtg tssop ? 8 (pb ? free) 100 units / rail MC100EPT22dtr2 tssop ? 8 2500 / tape & reel MC100EPT22dtr2g tssop ? 8 (pb ? free) 2500 / tape & reel MC100EPT22mnr4 dfn8 1000 / tape & reel MC100EPT22mnr4g dfn8 (pb ? free) 1000 / tape & reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d. resource reference of application notes an1405/d ? ecl clock distribution techniques an1406/d ? designing with pecl (ecl at +5.0 v) an1503/d ? eclinps i/o spice modeling kit an1504/d ? metastability and the eclinps family an1568/d ? interfacing between lvds and ecl an1642/d ? the ecl translator guide and8001/d ? odd number counters design and8002/d ? marking and date codes and8020/d ? termination of ecl logic devices and8066/d ? interfacing with eclinps and8090/d ? ac characteristics of ecl devices
MC100EPT22 http://onsemi.com 6 package dimensions soic ? 8 nb case 751 ? 07 issue ag seating plane 1 4 5 8 n j x 45 k notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a and b do not include mold protrusion. 4. maximum mold protrusion 0.15 (0.006) per side. 5. dimension d does not include dambar protrusion. allowable dambar protrusion shall be 0.127 (0.005) total in excess of the d dimension at maximum material condition. 6. 751 ? 01 thru 751 ? 06 are obsolete. new standard is 751 ? 07. a b s d h c 0.10 (0.004) dim a min max min max inches 4.80 5.00 0.189 0.197 millimeters b 3.80 4.00 0.150 0.157 c 1.35 1.75 0.053 0.069 d 0.33 0.51 0.013 0.020 g 1.27 bsc 0.050 bsc h 0.10 0.25 0.004 0.010 j 0.19 0.25 0.007 0.010 k 0.40 1.27 0.016 0.050 m 0 8 0 8 n 0.25 0.50 0.010 0.020 s 5.80 6.20 0.228 0.244 ? x ? ? y ? g m y m 0.25 (0.010) ? z ? y m 0.25 (0.010) z s x s m 1.52 0.060 7.0 0.275 0.6 0.024 1.270 0.050 4.0 0.155 mm inches scale 6:1 *for additional information on our pb ? free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint*
MC100EPT22 http://onsemi.com 7 package dimensions dim min max min max inches millimeters a 2.90 3.10 0.114 0.122 b 2.90 3.10 0.114 0.122 c 0.80 1.10 0.031 0.043 d 0.05 0.15 0.002 0.006 f 0.40 0.70 0.016 0.028 g 0.65 bsc 0.026 bsc l 4.90 bsc 0.193 bsc m 0 6 0 6 seating plane pin 1 1 4 85 detail e b c d a g detail e f m l 2x l/2 ? u ? s u 0.15 (0.006) t s u 0.15 (0.006) t s u m 0.10 (0.004) v s t 0.10 (0.004) ? t ? ? v ? ? w ? 0.25 (0.010) 8x ref k ident k 0.25 0.40 0.010 0.016 tssop ? 8 dt suffix plastic tssop package case 948r ? 02 issue a notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. 3. dimension a does not include mold flash. protrusions or gate burrs. mold flash or gate burrs shall not exceed 0.15 (0.006) per side. 4. dimension b does not include interlead flash or protrusion. interlead flash or protrusion shall not exceed 0.25 (0.010) per side. 5. terminal numbers are shown for reference only. 6. dimension a and b are to be determined at datum plane ?w?.
MC100EPT22 http://onsemi.com 8 package dimensions dfn8 case 506aa ? 01 issue c notes: 1. dimensioning and tolerancing per asme y14.5m, 1994 . 2. controlling dimension: millimeters. 3. dimension b applies to plated terminal and is measured between 0.25 and 0.30 mm from terminal. 4. coplanarity applies to the exposed pad as well as the terminals. ???? ???? ???? ???? a d e b c 0.10 pin one 2 x reference 2 x top view side view bottom view a l (a3) d2 e2 c c 0.10 c 0.10 c 0.08 8 x a1 seating plane e/2 e 8 x k note 3 b 8 x 0.10 c 0.05 c a b b dim min max millimeters a 0.80 1.00 a1 0.00 0.05 a3 0.20 ref b 0.20 0.30 d 2.00 bsc d2 1.10 1.30 e 2.00 bsc e2 0.70 0.90 e 0.50 bsc k 0.20 ??? l 0.25 0.35 1 4 8 5 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?t ypicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license un der its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended f or surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in a ny manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada japan : on semiconductor, japan customer focus center 2 ? 9 ? 1 kamimeguro, meguro ? ku, tokyo, japan 153 ? 0051 phone : 81 ? 3 ? 5773 ? 3850 MC100EPT22/d eclinps is a trademark of semiconductor components industries, llc (scillc). literature fulfillment : literature distribution center for on semiconductor p.o. box 61312, phoenix, arizona 85082 ? 1312 usa phone : 480 ? 829 ? 7710 or 800 ? 344 ? 3860 toll free usa/canada fax : 480 ? 829 ? 7709 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : http://onsemi.com order literature : http://www.onsemi.com/litorder for additional information, please contact your local sales representative.
|
